Resistance, Vulnerability and Immunity 5e: Damage Math Made Easy

Printable: all 15 conditions, saving throws, actions, rests and cover on 7 illustrated cheat sheet pages. Get the PDF ($4.99)

Every damage roll in D&D has a type: fire, slashing, poison, radiant and so on. Most of the time the type is just flavor. It starts to matter when the target has resistance, vulnerability or immunity to it. Those three words can cut a hit in half, double it, or erase it.

This guide covers what each one does, the exact order to apply them, and the stacking rule that saves a lot of arguments. If you need a refresher on damage and HP first, see how hit points work.

The three rules at a glance

TraitWhat happens to damage of that typeExample
ResistanceHalved (round down in the 2024 rules)14 slashing becomes 7
VulnerabilityDoubled9 bludgeoning becomes 18
ImmunityYou take none30 fire becomes 0

These traits only care about the damage type. A fire-resistant creature takes half from fireball, a torch and lava alike, because all of it is fire damage.

Resistance: half damage

If you have resistance to a damage type, damage of that type is halved against you. The 2024 rules say to round down, so odd numbers lose the half point.

Worked example. A level 3 barbarian is raging when a bandit captain’s scimitar hits for 9 slashing damage. Rage gives resistance to slashing damage, so she takes 4 (9 halved is 4.5, rounded down).

Resistance applies to each instance of damage. If three goblins each hit her for 5 piercing, each hit is halved on its own: 2 + 2 + 2 = 6 damage instead of 15.

Vulnerability: double damage

If you have vulnerability to a damage type, damage of that type is doubled against you.

Worked example. A skeleton is vulnerable to bludgeoning damage. The cleric hits it with a mace for 1d6 + 2 and rolls a 3, for 5 bludgeoning. The skeleton takes 10. This is why parties tend to send the mace-wielder after the bones.

Immunity: no damage at all

If you have immunity to a damage type, you don’t take damage of that type. A fire elemental is immune to fire, so a fire bolt that rolls 10 deals 0. Pick a different spell.

Immunity is the reason a party wants a mix of damage types. A wizard with only fire spells has a bad day against fire-immune foes.

The order of operations

When several things change a damage roll, the order matters. Both SRDs agree on the core: resistance and vulnerability come after every other modifier. The 2024 rules spell out the full sequence:

  1. Adjustments first: bonuses, penalties and multipliers.
  2. Resistance second: halve it.
  3. Vulnerability third: double it.

Worked example (from the 2014 rules). A creature resistant to bludgeoning damage is standing in a magical aura that reduces all damage by 5. An attack deals 25 bludgeoning. Subtract 5 first (20), then halve it: the creature takes 10. If you halved first and then subtracted, you’d get 7, which is wrong.

Worked example (from the 2024 rules). A creature has resistance to all damage, vulnerability to fire, and stands in the same aura. It takes 28 fire damage.

StepDamage
Start28
Aura: minus 523
Resistance: halve, round down11
Vulnerability: double22

Notice that resistance and vulnerability together don’t cancel to the exact original number. The rounding eats a point along the way.

Multiple resistances don’t stack

Having resistance to the same damage from two sources still counts as one instance. The damage is halved once, not quartered. The same goes for vulnerability: two sources still mean double, not quadruple.

Worked example. A raging barbarian also has stoneskin cast on her. Both give resistance to slashing damage. An axe hits her for 12 slashing: she takes 6, not 3. The second resistance is wasted, so the caster might pick a different target for that spell.

What does help is resistance to different types. Protection from energy (fire) plus Rage (slashing, piercing, bludgeoning) covers more of the damage coming at you.

Condition immunity

Immunity isn’t only about damage. A creature can also be immune to conditions. Immunity to a condition means that condition doesn’t affect it at all.

For players, heroism makes its target immune to the frightened condition while the spell lasts. In the 2024 rules a paladin’s Aura of Courage gives you and your allies in the aura immunity to frightened too.

Check a monster’s stat block before you build a plan around a condition. Casting hold person tricks on something immune to paralyzed is a wasted turn. The conditions guide covers what each condition does.

Common sources

SourceWhat you get
Barbarian RageResistance to bludgeoning, piercing and slashing
StoneskinResistance to bludgeoning, piercing and slashing (2014: nonmagical only)
Protection from energyResistance to one of acid, cold, fire, lightning or thunder
Fire shieldResistance to cold (warm shield) or fire (chill shield)
Dwarf (Dwarven Resilience)Resistance to poison damage
Petrified conditionResistance to all damage
SkeletonsVulnerable to bludgeoning, immune to poison
MummiesVulnerable to fire, immune to necrotic and poison
Fire elementalsImmune to fire and poison

Resistance is one of the reasons the barbarian is so tough. More on that in the barbarian guide.

Critical hits and resistance

A critical hit doubles the damage dice, and that happens when you roll damage, before resistance. So a crit against a resistant target still hurts more than a normal hit. You roll the extra dice, add your modifier, then halve the total.

What changed in the 2024 rules

The core rule is unchanged: resistance halves, vulnerability doubles, multiple instances count as one, and both apply after other modifiers. The 2024 SRD tightens the details.

Topic2014 (SRD 5.1)2024 (SRD 5.2)
RoundingNot stated in the damage rulesRound down when halving
OrderResistance, then vulnerability, after all other modifiersSame, written as a three-step list
Immunity definedUsed in stat blocks, not spelled out in the damage rulesDefined: no damage of that type; conditions don’t affect you
”Nonmagical weapons”Many monsters resist or ignore nonmagical bludgeoning, piercing and slashingThat wording doesn’t appear in the SRD 5.2 stat blocks
StoneskinResistance to nonmagical bludgeoning, piercing and slashingResistance to all bludgeoning, piercing and slashing
Stat blocksSeparate lines for damage immunities and condition immunitiesOne “Immunities” line, damage types first, then conditions

The “nonmagical weapons” change is the big one for DMs. A 2014 werewolf shrugs off ordinary weapons that aren’t silvered, which is why the 2014 rules sell silvered weapons for 100 gp. If you’re running a 2014 monster, the magic weapon question still matters.

Tracking it in combat

Resistances are easy to forget in the middle of a fight, especially when one monster has three of them. DMs can jot “resist fire” or “immune: poisoned” next to each creature in the free Initiative & Condition Tracker, and the DM screen keeps the condition rules a click away.

Frequently asked questions

What does resistance do in 5e?

Resistance to a damage type halves damage of that type against you. In the 2024 rules you round down, so 15 fire damage becomes 7 against a creature with fire resistance.

Do multiple resistances stack in 5e?

No. Multiple instances of resistance to the same damage count as one. A creature with resistance to fire and resistance to all damage still takes half fire damage, not a quarter.

In what order do you apply resistance and vulnerability?

Apply bonuses, penalties and other adjustments first, then resistance, then vulnerability. A creature with both resistance and vulnerability to the same damage ends up taking roughly normal damage.

What is the difference between damage immunity and condition immunity?

Damage immunity means you take no damage of that type. Condition immunity means a condition, such as poisoned or frightened, doesn't affect you. Many undead have both, like immunity to poison damage and the poisoned condition.

Does resistance apply to every hit or once per turn?

It applies to every instance of damage of that type. A raging barbarian halves each sword hit separately. What it can't do is apply twice to the same instance.

Does barbarian Rage give resistance to all damage?

No. Rage gives resistance to bludgeoning, piercing and slashing damage only. Fire, poison, psychic and other types hit a raging barbarian normally.

Useful at the table

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. More about this.

← All articles

Free: Class Quick Reference

All 12 Player's Handbook classes on one printable page each: levels 1 to 5, subclasses, a standard array and the mistakes new players make. Leave your email and the 12-page PDF is yours, plus the occasional new guide.